How to Put iPhone in Recovery Mode?

Affiliate disclosure: In full transparency – some of the links on our website are affiliate links, if you use them to make a purchase we will earn a commission at no additional cost for you (none whatsoever!).

Recovery mode is a fool-proof in iBoot that is used to refresh the device with a new operating system, whether the presently installed is somehow disturbed or the device is undergoing an update via iTunes. Restarting the iPhone may not be the solution for some problems. Anyway, here is the brief procedure on how to put iPhone in recovery mode is given.

Stepping into Recovery Mode:


There is a technique called the Automatic method. In MobileDevice Framework, the function is called AMDeviceEnterRecovery.

Second method is called Manual Method:

  • The device must be connected to the computer.
  • Be sure that the iPhone is on the home screen.
  • Power button must be held down.
  • Neglect the message ‘Slide to Power off’, until the screen becomes black; hold down the power button and the home button.
  • Turn on the iPhone once again.
  • Home button must be held down.
  • Halt till you notice the iTunes logo and the cable on the iPhone.

There is another way to attain the above result. The iPhone recovery mode steps are mentioned below.

  • Shut down the device.
  • The home button must be pressed and held.
  • The device must be connected to iTunes.
  • Halt till you notice the iTunes logo and the cable on the iPhone.

Coming Out of Recovery Mode:

This is called an Automatic method. In the MobileDevice Framework, it is called AMRecoveryDeviceSetAutoBoot and AMRecoveryDeviceReboot functions. Another way to do this is to follow the below instructions.

  • Setenv auto-boot true
  • Save env
  • Reboot

Another way is a manual method. Till the Apple logo appears, keep the home button and the power button held. This is to come out of recovery mode iPhone.

How to Put iPhone in Recovery Mode

The process for how to put iPhone in recovery mode is fairly simple. Just follow the steps mentioned below and the process will be done.

  • The step involves disconnecting the iPhone from the computer. The process won’t give good results if the device is connected to the computer. Leave the cable connected to the computer as the device will be reconnected to the computer later in the procedure.
  • Shut down the device. Hold down the power button and turn it off. The moment the power slider appears, scroll it to the right side. Wait for the device to completely turn off before the process is started.
  • Keep the home button pressed and hold it. Hold the home button and connect it to the computer with the help of a USB cable. When the device is connected to the computer, it must turn on. If the low battery sign pops up, charge your device for some time and try the process another time.
  • Keep the home button held. After few seconds, the screen will show Connect to iTunes on the device. This screen is a photograph of an arrow directing from a USB cable to the logo of iTunes. You can release the home button when you see the screen.
  • The next step is to open iTunes. If you are doing a recovery via iTunes, then open the program. iTunes will show a message telling that the device has been connected in recovery mode. From here on, you can continue to reconstruct your iOS device.
  • Come out from the recovery mode by holding both the power and home buttons for around 10 seconds. This helps in powering down the device. Press and hold the power button for a moment to power it on normally.

If your system declines to boot for whatever reason, it might be great to boot it into recovery mode. Recovery mode just bundles few basic services and leaves you in command line mode. The user is then signed in as the superuser (the root) and could improve your system with the help of command line tools. If booting into recovery mode doesn’t give positive results, your installation CD could still be used as detailed in LivecdRecovery.


The procedure on how to put iPhone in DFU mode is as follows.

  • With the help of a USB cable, plug in your device to a computer.
  • Shut down the device.
  • Keep the power button held for 3 seconds.
  • Keep the home button and power button held for 10 seconds.
  • Free the power button, but hold the home button.
  • In some time, you will be notified by iTunes saying that it has recognized a device in Recovery Mode.

This will put iPhone into DFU mode.

To solve the problem when iPhone is stuck in Recovery Mode, use TinyUmbrella or iTunes Restore. Apple recovery mode information is the same too.

Few details on Restore mode are also provided.

Restore mode is the stage when an iDevice goes in to run a ramdisk.

The procedure to restore the iDevice is as follows.

  • Pull the device from DFU mode to iBSS or from userland to iBoot. Prepare it for restoring.
  • Verify the iDevice restore with Apple, TinyUmbrella, or Cydia.
  • Develop the firmware to restore.
  • Develop the iDevice for the restore.
  • Restore the software of the iDevice (the ASR Restore).
  • Verify the software of the iDevice (the ASR verify).
  • Restore the firmware of the iDevice.

The rest of the restore process is not reported to the host computer in real-time. This combines the restore of the NOR/boot partition image and the lodging of the baseband firmware.

The firmware is the largest disk image file in the IPSW, which includes all files for the root partition. The ram disks are the tiny disk images in case of iPhone, iPhone 3G, iPad, iPhone 3GS, and the base band too.

The authentic jailbreaks are executed by booting the phone into restore mode and copying few files from the user partition to the root partition. This procedure is done with the usage of the cp iBoot command, a command which has a connection to the entire filesystem.

The recovery mode logo is geared to a functionally equivalent partition or to a NOR and is exhibited when the device is in recovery mode. This is how you can put the iPhone in recovery mode. Let us know if you find anything amiss, we will address them for you! And if you don’t know how to update the iPhone, you can see this guide telling you steps for updating the iPhone. That will help you out.


Aishwar Babber is a passionate blogger and a digital marketer. He loves to talk and blog about the latest tech and gadgets, which motivates him to run GizmoBase. He is currently practicing his digital marketing, SEO, and SMO expertise as a full-time marketer on various projects. He is an active investor in NewSmartWave and ImageStation.

Leave a Comment